Handrail Brackets 2  

D  6^5/16" tall, 3^1/2" wide, 2^3/8" deep     
D  $21 each - with welded plate, $26          

E  8^1/4" tall, 2^3/4" wide, 2^3/8" deep 
E  $21 each - with welded plate, $26

►► There are instructions below that show you how to measure for the angle to which these brackets will be fabricated ◄◄

These brackets must have support plates welded to them at the proper angle for your staircase.  We will need the rise and the run measurements from you in order to put the correct slant on your handrail.  We will also need to know if, when looking up the stairs, if the handrail will be on the left side or the right side.

E-type handrail bracket shown in dark bronze

D-type handrail bracket - black

►►Please click the diagram to enlarge it.◄◄

►►Above, are instructions that show you how to measure for the angle to which these brackets will be fabricated ◄◄

This shows examples of how plates might be welded to brackets for installation in a shallow and a steep staircase.

► Please scroll down for links to the pages on this site. ◄◄

We will need to know the pitch of your steps so that we can fabricate these brackets correctly.  Please click on the diagram below to see how to find the pitch.  Having the rise and the run of the steps also helps - it double checks the pitch angle.